Venice Gloss Kitchen and Bedroom Replacement Doors
(5 Gloss Colours Available)
Avoid any measurement errors, please view our measuring guide below.
Bella Kitchen and Bedroom Doors
(60 Colours Available and 34 Styles)
Avoid any measurement errors, please view our measuring guide.
Doors under 283mm high and 198mm wide will be supplied without an internal design.
Construction: 18mm Vinyl wrapped MDF
Drawer Fronts
Height: 60 to 282mm
Width: 100 to 1200mm
Standard Doors
Height: 283 to 1699mm
Width: 100 to 1200mm
Tall Doors
Height: 1700 to 2540mm
Width: 100 to 1200mm
The maximum door size is 2540H x 1200W
Tall door designs with two panels will be supplied with the mid rail at 655mm from the bottom edge to the centre of the mid rail as standard.
Back: Matching
Delivery Information
Because our products come from a range of manufacturers you may have multiple delivery slots and costs. Once you have spent over £500 all delivery costs will be waived and free delivery will apply.
Delivery Costs
Small Product £7.99
Example: Tap Box
Medium Product £15.98
Example: Sink Box
Large Product £25.00
Example: Single Oven
Extra Large Product £59.99
Example: Worktop
Spend Over £500
Free Delivery On All Goods Supplied
Delivery Tracking
We will send you the relevant tacking information when your delivery is out for delivery from your local couriers via email.
Delivery Timescale
We aim to delivery all purchased products as fast as we can however different products types can be delivered at different times. Delivery times are listed on each individual product before purchase. If you are unsure please contact our support team 01637 520478
Measurements must be taken from the inside of the door, as the outside often includes patterns which may lead to measurement errors.
Measure across the top of the door to get the Width and from bottom to top to get the Height.
Measurements should be recorded in millimeters (mm) and written as Height (H) x Width (W) e.g., 570mm H x 496mm W.
When specifying Right or Left-hand hinge drilling, imagine the hinge as you look at the door, from the front, with the door closed.
Hinge drilling is measured from the top or bottom edge of the door to the centre of the hinge hole.
